Tachograaf programmer CD400+ digitaal & analoog

Professionele werkplaats programmer voor digitale en analoge tachografen van ALLE merken. Voor calibratie werkzaamheden aan de digitale tacho heeft u een geldige werkplaatskaart nodig! Wij hebben ook een goedkopere versie voor alleen digitale tachografen. Wordt compleet geleverd inclusief kabels voor alle merken.

Ondersteunde tacho's: 

Analoog:  KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
Digitaal:  DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.

Functies:

- W figure determination on measuring track (with optional photo-cell) or rolling road.
- K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
- Parameter programming including IMS (Independent Motion Signal) and VDO counter.
- Speed simulation and customizable automatic test diagram.
- DTCS reading (Digital) and erasing.
- Sensor pairing (KITAS activation).
- Clock test.
- Workshop card’s PIN recording and input through CD400.

Advantages

- No power connection nor battery charging required, the only tester powered by the tachograph itself.
- Compact size, the smallest tachograph tester on the market.
- User friendly, clear 4 lines menus, no training required.
- Automatic tachograph model detection on power on.
- Double accuracy of the W factor measure on track by detecting half pulses.
- The only tester being able to reset the odometer and change the sender type on the VR2400.
- Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.

Technical Specifications:

- Graphic FSTF LCD Display:
(100 x 32 pix. / 4 lines x 20 char)
White LED backlight
- Size: 150 x 100 x 45 mm
- Supply voltage: 9 to 30 VDC
- Supply current: 12mA
- Case: green-blue ABS (IP40).
- Operating temp: -20…+70°C
- Weight: 155g